nGauge How-To

How To Configure Gauge Display for Your HP Tuners nGauge!

Posted by Jonathan Baker on

How To Configure Gauge Display for Your HP Tuners nGauge!

To change up the gauges display on your HP Tuners nGauge, follow these tips! First, power up your nGauge and select "GAUGES>CONNECT"  Once the Gauges display comes up, swipe across the screen. You will see that four gauge, six gauge, and single gauge options are available.  To change what gauges are displayed, tap on one of the gauges. Next select "SIGNAL". You can then begin scrolling through the parameters you can select the gauge to display.  Once you have found a parameter you want displayed, tap on the Check Mark. If you want to change the color or units of the...

Read more →


How To Change the Sleep/Wake Settings on Your HP Tuners nGauge

Posted by Jonathan Baker on

How To Change the Sleep/Wake Settings on Your HP Tuners nGauge

If you want to change the way your HP Tuners nGauge powers up or stays off, this is how you configure that! First: Power up your nGauge and from the Main Menu, select "DIAGNOSTICS>SETTINGS>SLEEP/WAKE" Next: Select "SLEEP MODE" or 'WAKE MODE" and configure how you wish! If you want the nGauge to always come on and shut off with your engine, set "SLEEP MODE" to "ENGINE RUNNING" and then "WAKE MODE" to "VOLTAGE LEVEL".

Read more →


How To Turn your HP Tuners nGauge LED Lights into a Shift Light!

Posted by Jonathan Baker on

You can set up your HP Tuners nGauge to act as a warning for various parameters. Use this as a template for other parameters if you wish! Here is how to use it as a Shift Light! Step 1. Power up your nGauge and select "GAUGES>CONNECT" Step 2. Swipe across the screen until settings for the LEDs come up. Step 3. Select the box in the bottom-left side and select "SIGNAL". Step 4. Using the arrows, find "ENGINE RPM" and select the Check Mark. Step 5. Set the RPM for each color to illuminate. Set the first RED LED to the...

Read more →


How to Load a Custom Tune Using the HP Tuners nGauge

Posted by Jonathan Baker on

Step 1. Save the Jonathan's Performance custom tune from your email to your computer. Step 2. Connect to the HP Tuners nGauge with a mini USB cable if you have one, or unplug the OBD2 cable from the car and remove the SD card from the HP Tuners nGauge and install it into your computer using the SD card adapter. If using the mini USB cable, when the HP Tuners nGauge powers up, go to "SETTINGS>USB SD" for the HP Tuners nGauge to be recognized. Step 3. Find the nGauge folder/SD card on your computer and open it. Find the folder...

Read more →


How to Data Log with the HP Tuners nGauge

Posted by Jonathan Baker on

How to Data Log with the HP Tuners nGauge

Step 1. Download the gauges configuration file for your vehicle. 2011-2014 Mustang 5.0 Manual 2011-2014 Mustang 5.0 Auto 2015-2017 Mustang 5.0 Manual 2015-2017 Mustang 5.0 Auto Step 2. Either connect to the HP Tuners nGauge with a mini USB cable if you have one, or unplug the OBD2 cable and remove the SD card from the HP Tuners nGauge and install it into your computer using the SD card adapter. If using the mini USB cable, when the HP Tuners nGauge powers up, go to "SETTINGS>USB SD" for the HP Tuners nGauge to be recognized. Step 3. Find the nGauge folder/SD card...

Read more →